Skip to content

Bella 8 ft. x 16 ft. Greenhouse Kit - Grey Structure & Twin Wall Panels

Structure color
Glazing

The Bella Greenhouse is a beautiful and practical 8 ft. wide greenhouse that features virtually unbreakable twin-wall polycarbonate panels, creating an ideal combination of sunlight diffusion, heat insulation, and safety for all your gardening needs. The bell-shaped greenhouse was specifically designed to improve wind resistance and allow snow to easily slide off.
The extra-large workspace and wide double doors allow the most avid gardener plenty of room to grow an abundance of vegetables and herbs and still have room for transplanting tender plants and for storing tools and accessories. The Bella Greenhouse Kit also includes a galvanized, rust-resistant steel perimeter base for additional structural support, stability, and alignment. Get the Bella DIY Greenhouse today, for a stunning and functional addition to your gardening experience.

  • Virtually unbreakable 4mm door and window twin-wall polycarbonate panels & 6 mm wall and roof panels,
    maintain ideal temperatures and protect from strong sunlight exposure.
  • The bell-shaped greenhouse allows snow to slide easily off and improves wind resistance.
  • All panels are 100% UV protected and block harmful UV rays.
  • Easy DIY installation – sliding panel assembly system.
  • Durable, rust-resistant aluminum frame.
  • Galvanized steel base included with designated holes for anchoring for additional structural stability (anchors not supplied).
  • Low-threshold and double doors for easy access.
  • Maintenance-free greenhouse.
  • The greenhouses are available in various sizes. Click to find more greenhouse kits.
Model: #703731

Dimensions

A 490cm 16'1"ft
B 244cm 8'ft
C 219cm 7'2"ft
D 118cm 3'10"ft
E 171cm 5'7"ft

Product Details

Roof vent

Provides airflow and allows regulation of heat and humidity

Easy access and use

Large hinged double door Low threshold Magnetic door catch Anchoring kit included Galvanized steel base adds structural stability  

Rating and Reviews

0.00 (0 Reviews)
Rating Breakdown
0
0
0
0
0
Post a review
Customer Reviews (0)

There are no reviews yet.

FAQ

My name is Harmony.
13:54 PM
No, it is not an option, it cannot be performed.
Yes, it can be disassembled, relocated and reassembled at a different location.
No, it is not an option to get doors on both ends.
It is not possible to install the Lean To Grow House’ door at the other side. It is possible to install only as shown in the instructions.
The greenhouses do not come with a floor or base.
Yes, the polycarbonate panels are high impact resistant and withstand hail.
The warranty for all our greenhouses is for at least 5 years, some for more. The crystal-clear single layer or twin-wall polycarbonate panels maintain their integrity, they do not discolor, opacify, fracture or shatter over time.
Each wall section can carry up to 44 lbs. at most – an entire wall would depend upon the greenhouse’ size.

Assembly guide

Assembly instructions & Certificates for Downloads

Foundation

Clear the site

The product /////

Clear the site
 
 
Level the ground
 
 
Important We recommend /////
A
Prepare the site

The product must be built on a solid anleveled surface in order to perform properly.

1 - Clear the site
 
 
2 - Level the ground
 
 
Important We recommend checking for restrictions or covenants for building this product in your area. In addition we advise to check if you need to submit any forms or if any permit is required prior to building the product.
B
Choose your foundation type

For a foundation, we recommend using three material types: Concrete / Pressure-treated wood/ wood deck / Paver blocks.

Option 1: Solid base
 
Preferred
Option 2: Solid frame
 
Preferred
Option 3: Firm ground / grass
 
Possible
 

* The size of the greenhouse displayed is for illustration purposes only and may not reflect the size of your greenhouse.

Not possible
C
Anchor to foundation
On a solid foundation / frame
 
 

Secure the product to the foundation of your choice using suitable screws & plugs or masonry anchors (not supplied).

Make sure you have at least 5 cm / 2″ between the product base and the edges of your foundation – on all sides.

On soil / grass
 
 

Secure the product to the ground surface using suitable long pegs (not supplied). Please consult with an expert regarding which fasteners are suitable for other surface types.

Need help making a purchase decision?
Fill out the form below and we will help!